ETC Element Classic, User Manual

Page: 614 / 687

600 Ion Classic User Manual
Example:
The following fields are available for the fader targets:
•
Device ID – the MIDI Show Control device ID that should respond to the
message
•
ID (subs only) – the number of the submaster fader
•
Level – the specified level of the fader from 0-100% (0-127 decimal, 00-
7F hex)
•
Fire – represents executing a macro. The following fields are available:
•
Device ID – the MIDI Show Control device ID that should respond to the message
•
ID - the macro number to be fired
Creating a MIDI Event List and Event
Open the Show Control Display
•
[Displays]>[More SK]>{Show Control}
Create a new Event List and choose the Network type
•
<Event> [6] [/] {Type} {Network} [Enter]
Enable the list to respond to {External} sources
•
<Event> [6] [/] {External} [Enter]
Creating a Note On Event
Create a new event and open the MIDI String configuration screen
•
<Event> [1] [More SK] {MIDI String}
Select the {Note On} type
•
{Note On}
Select the MIDI Note value, for example, Bb (B-flat)
•
{A#/Bb}
Select the MIDI Note octave or leave it as Any. In this example, we’ll choose Any.
•
<Octave> {Any}
Select the MIDI channel
•
<Channel> {1}
Select the velocity
•
<Velocity> {127}
Optionally, select the velocity threshold so that the event will be triggered if the message is
above this level. To disable velocity threshold, leave it at zero.
•
<Velocity Threshold> {0}
Press {OK} to save the event
•
{OK}
Specify the action for the event
•
<Event> [1] [Macro] [1] [Enter]