ETC Element Classic, User Manual

Page: 250 / 687

236 Ion Classic User Manual
To open the color path display, click on the gear icon in the color picker display and select
Fade. To open the color path list display, press the {Color Path} icon in the home screen, use
[Tab] [3][3], or from the CIA by going to Browser > Record Target List > Color Path.
Color paths are selected either by clicking on the drop down above the color path or by using
{Color Path} [n].
Note:
Channels involved in the fade have to be selected before you can choose or
modify a color path.
The color path display has a drop down list of the available paths, a color path preview bar,
and control buttons. An indication line will display on the color space to show the color fade.
Available control buttons are:
•
- replays the color fade using the cue time.
•
- replays the color fade using the Go to Cue time from Setup.
•
- replays the color fade in five seconds.
•
- replays the color fade in ten seconds.
•
- pauses the color fade.
•
- plays / resumes the color fade.
•
- skips to the end of the color fade.
You can also click on the color path preview bar to scrub to any point along the fade.
Additional controls may be available based on the color path selected. For example, Color Path
7 has additional controls for Hue, Saturation, and Brightness. You can move those controls to
adjust the fade, and you'll see a representation of those changes in both the color path
preview bar and in the color space.