ETC Element Classic, User Manual

Page: 189 / 687

Patch 175
•
{Preheat} - This field allows you to specify an intensity value to preheat incandescent
filaments. When a preheat flag is applied to a cue, any channels that are fading from
zero to an active intensity and have been assigned a preheat value in patch will preheat
in the immediately preceding cue. The preheat flag is applied to a cue as an attribute
when the cue is recorded.
•
[1] {Preheat} [0] [3] [Enter] - channel 1 is assigned a patched preheat value of 3%.
•
{Proportion} - An attribute to set a modifier for the intensity of the device. For example,
if the proportion is set at 90%, the actual output will always be 10% lower than the
specified intensity parameter, as impacted by the various playbacks or submasters. This
value is set numerically in a range of 0% to 200%.
•
[1] {Attributes} {Proportion} [1] [2] [5] [Enter] -applies a 125% proportion to channel 1.
•
[1] {Attributes} {Proportion} [Enter] - removes the applied proportion from channel 1.
•
{Curve} - Used to assign a curve to a channel in Patch. In Patch, curves can be applied to
intensity and non-intensity parameters. See
About Curves (on page 426) for more
information.
From channel view:
•
[1] {Curve} [4] [Enter] - applies curve 4 to the intensity parameter of channel 1.
•
[2] [Part] [3] {Curve} [3] [Enter] - applies curve 3 to the intensity assigned to channel 2,
part 3.
From address view:
•
[3] {Curve} [3] [Enter] - assigns curve 3 to address 3.
•
[3] [/] [2] {Curve} [4] [Enter] - assigned curve 4 to universe 3, address 2.
•
{Fan Curve} - Used to assign a curve to the scroller fan parameter, which allows for the
output of the fan to be controlled by the intensity of the channel. Curves available for
this are the same used for intensity parameters and cues.
Note:
When {Curve} or {Fan Curve} is pressed, a list of the available curves will be
displayed. Clicking on an available curve will assign it.
•
{LD Flags} - This field allows channels to contribute to live and dark move flags in the
playback status display. Disabling will prohibit those channel moves from contributing to
the live and dark move flags. This is enabled by default.
•
{GM Exempt} - Used to exempt the intensity of channels from grandmaster, blackout,
rem dim, and go to cue 0 operations.
•
{Invert Pan} {Invert Tilt} - An automated fixture attribute used to invert the output of
pan, tilt, or both. Select either the {Invert Tilt} or the {Invert Pan} button on the CIA.
•
[2] {Attributes} {Invert Pan} - inverts the output of the pan parameter on channel 2.