ETC Element Classic User Manual Download Page 114

Page: 114 / 687

100

Ion Classic User Manual

To toggle between viewing just the intensity information and other parameters, press [Shift] &
[Format].

The label column can be hidden by checking the Suppress Target Labels option in the Live and
Blind configuration menu. For more information, see

Live and Blind Configuration Menu (on

page 103)

Indicators in the Live / Blind Display

This section identifies the conventions used to indicate various conditions in Live and Blind.

This is the Live / Blind summary view. Please note examples of

color

and

text

indicators in the

following graphic:

Note:

The color and text conventions apply regardless of the format of Live/ Blind

being used (see

Using [Format] (on page 96)

Note:

When manual channels are used, there will be an advisory that says "Manual

Channels" in red in the upper left hand corner of any Live display.

Most of the channels in the above image are conventional channels (intensity is the only
available parameter).

Several channels in the image are automated fixtures (possessing more parameters than just
intensity).

Conventionals

Conventions display the channel number, intensity, and any additional data below.

Automated Fixtures or Multi-parameter Devices

Summary of Contents for Element Classic
















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Element Classic

Reviews:

Related manuals for Element Classic

Brands by name

Popular brands

ETC Element Classic, User Manual

Search results

Summary of Contents for Element Classic

Reviews:

Related manuals for Element Classic

Brands by name

Popular brands