Douwe Egberts Cafitesse 700, Back Office Manual

Page: 88 / 265

July 2004
4 - 25
MIXER TEST
Press the MIXER TEST soft key in the settings menu.
The mixer test setting menu is opened. (Fig. 50)
This menu allows you to determine if the mixer test
should be carried out with or without the trough being
in place. The default setting is NO.
To change the setting, press the NO or YES key.
FLUSHING
Press the FLUSHING soft key in the settings menu.
The flushing setting menu is opened. (Fig. 51)
Here, you can set the hammer pulses during flushing
for the following valves:
• inlet valve
• hot water valve
• cold water valve
Touch the entry to be set or use the scroll bar to
switch between the settings. To change the setting,
use the DECREASE and INCREASE soft keys.
COMMUNICATION PORT
Press the COMM. PORT soft key in the settings menu.
The communication port setting menu is opened.
(Fig. 52)
This menu allows you to make settings for exchanging
data with external devices. You can make settings for
the
• communication interface
• communication protocol
• communication format
Touch the entry to be set or use the scroll bar to
switch between the settings. To define the entry, use
the PREVIOUS and NEXT soft keys and select a
predefined entry.
Fig. 52
PREVIOUS NEXT
Communication interface : RS232
Communication protocol : Console
Communication format : Text
SETTINGS: COMMUNICATION PORT
Fig. 50
NO YES
Allow the mixer test without
the trough in place:
SETTINGS: MIXER TEST
NO
DECREASE INCREASE
Inlet valve hammer pulses : 6
Hot water valve hammer pulses : 14
Cold water valve hammer pulses : 5
SETTINGS: FLUSHING
Fig. 51
Cafitesse 700 - Programming