Douwe Egberts Cafitesse 700, Back Office Manual

Page: 156 / 265

July 2004
5A - 14
Functions - water system
9
10
12
13
• Pull off the 6-pin plug (9) of the sensor block
(10). (Fig. 3 + 4)
• Remove the sensor block (10) including the
seal from the cold zone cover (11). (Fig. 3, 4)
• Pull off the plug contacts (12) on the boil
over sensor (13). (Fig. 4)
• Remove the boil over sensor (13) from the
cold zone cover. (Fig. 4)
• The assembly is carried out in reverse order.
• On assembly, it is important to make sure
that
-
the seal is placed onto the sensor block
from below before both parts are inserted
into the cold zone cover. (Fig. 4)
WARNING: Make sure to install the correct
boil over sensor for Cafitesse
700 dispensers, which must
not be confused with the one
for Cafitesse 400 dispensers.
Observe the correct activation
temperature of 75
°
C (176
°
F)
±
5 K.
Fig. 4
Fig. 3
9
11
Cafitesse 700 - Functions - water system