Douwe Egberts Cafitesse 700, Back Office Manual

Page: 207 / 265

July 2004
5F - 5
Functions - cooling system
• Take the product packs out of the cooling
compartment and then close the door of the
cooling compartment.
• Press the jack latch (7) downward and then
swivel the cooling compartment (8) 90
°
upward, until the leaf spring (9) latches into
place on the left side. (Fig. 2)
The software on the touch screen
provides the information indicating
which cooling unit is defective and
needs replacement. (See chapter 3, 4)
• Undo the respective 4-pin plug (10) for the
cooling unit on the console (11). (Fig. 3)
• Remove the exhaust air plate (12) from the
respective cooling unit. (Fig. 4)
• Undo the two screws (13) in the centre of
the heat sink (above and below the fan)
and then remove the cooling unit (14). Hold
the screws during this procedure. (Fig. 4)
• The assembly of the new cooling unit is
carried out in reverse order.
To swivel the cooling compartment
downward, the leaf spring must be
pressed in slightly. Press the cooling
compartment downward until the jack
latch snaps into place on the bottom
left-hand side.
Fig. 3
11
Fig. 4
13
12
10
Fig. 2
8
9
7
14
Cafitesse 700 - Functions - cooling system