Douwe Egberts Cafitesse 700, Back Office Manual

Page: 38 / 265

July 2004
Installation /
Putting into Operation
2 - 26
Dosing systems: 3 pulsed dosing systems, electronically controlled dosing coil,
pulse driven pump, integrated into the product packs, electronic
'concentrate empty' indicator.
Drink delivery speed: Manufacturer’s setting: average value for coffee at a ratio of 1:20
1 cup (150 ml, 5 floz USA): 6 sec.
1 pot (1500 ml, 50 floz USA): 44 sec.
Delivery modes: The delivery mode, the size of a portion and the beverage strength
are adjustable.
Delivery modes: portioned or continuous flow for all outlets
Further installation requirements: Height: up to 2000 m (6562 ft)
Ambient temperature: 5
°
–max. 32
°
C
Distance to wall: 50 mm (2 in)
(measuring from the back side of
the dispenser)
The dispenser is protected against dripping water.
Heating capacities: The dispenser is equipped with a heating capacity changeover
switch. It is used to connect the dispenser to all of the com-
monly used mains voltages/mains fuses (see table).
For the connection to European mains sockets that are different
from the German/French safety plug socket, adapter cables are
available (see table).
(Ordering information, see spare parts list)
DANGER: Disconnect the dispenser from the mains
before changing over the heating capacity.
There is a danger of destroying the dis-
penser!
The heating capacity may only be changed
over by a trained service technician.
The slip-on rotary switch is a service tool
that may only be used by the service techni-
cian. It must be removed after the heating
capacity has been changed.
Glue a corresponding sticker onto the rating
plate after the heating capacity has been
adjusted.
Cafitesse 700 - Installation / Puttting into Operation