Douwe Egberts Cafitesse 700, Back Office Manual

Page: 67 / 265

July 2004
4 - 4
4.2 Operator interface
Using the operator interface of the Cafitesse 700
dispenser, the operator can make different settings.
These include, for example, drink prices, energy saving
periods, etc. The service technician determines which
settings can be made by the operator.
4.2.1 Entering the operator mode
To enter the operator mode, press the dispenser stop
button and hold the operator tag at the same time in
front of the RFID (radio frequency identification) an-
tenna area. (Fig. 3)
Using the service tag you will also have
access to all operator menus. The operator
authorization level is overruled by the service
authorization level.
The start menu of the operator mode is opened. It
indicates
• the software version
• the current weekday and time
• the active error codes
• information on the cleaning procedures to be carried
out next
(Fig. 4)
Press MORE ERROR INFORMATION in order to
display possible further error messages. If possible,
remedy the indicated errors.
If there are no active errors, the MORE
ERROR INFORMATION soft key is not
displayed.
Press the CONTINUE soft key. If no flushing or clean-
ing & flushing is required, the main operator menu is
called up. If any flushing or cleaning & flushing is
required, the corresponding screen for the cleaning
procedure is opened.
For further information on the cleaning procedure,
please refer to the Operator Manual.
Fig. 4
MORE ERROR INFORMATION
CONTINUE
Active error code: 30
OPERATOR MODE (v 1.10) Thu 11:10 am
Next flushing : Thu 10:00 am
Next flush & clean : Mon 10:00 am
Fig. 3
stop
20mm
Please make your selection
Douwe Egberts Coffee Systems
small
medium
large
Cafitesse 700 - Programming