Douwe Egberts Cafitesse 700 Back Office Manual Download Page 148

Page: 148 / 265

July 2004

5A - 6

Functions - water system

•

Swivel the boiler out of the dispenser to-
wards the front until reaching the stop
(approx. 45

). (Fig. 3)

Disassembly of the boiler

•

After tilting the boiler into the service posi-
tion, lift it up to the stop.

•

Pull the boiler towards the front out of the
housing and then place it on the boiler tray.

•

The reassembly is carried out in reverse
order.

•

On reassembly:
-

Insert the boiler in the vertical position into

the guide rails (10, Fig. 4).

Push the boiler into the housing until the

stop is reached, and then lower it.

Tilt the boiler towards the front until it

rests on the boiler console.

Swivel the boiler back into the housing.

Fig. 3

Fig. 4

Cafitesse 700 - Functions - water system

Summary of Contents for Cafitesse 700










































































































































































































































































Search results

Summary of Contents for Cafitesse 700

Reviews:

Related manuals for Cafitesse 700

Brands by name

Popular brands

Douwe Egberts Cafitesse 700, Back Office Manual

Search results

Summary of Contents for Cafitesse 700

Reviews:

Related manuals for Cafitesse 700

Brands by name

Popular brands