Douwe Egberts Cafitesse 700 Back Office Manual Download Page 14

Page: 14 / 265

July 2004

Installation /

Putting into Operation

2 - 2

Installation / putting into operation

2.1 Transport / handling of the dispenser during transport

•

Dimensions of the dispenser incl. packaging and dispenser pallet:

Cup Version:

Height:

850 mm

Width:

785 mm

Depth:

565 mm

Pot Version:

Height:

950 mm

Width:

785 mm

Depth:

565 mm

Transport in general

CAUTION:

•

Transport the dispenser carefully.

•

Do not throw the dispenser or handle it incorrectly.

•

Do not transport several dispensers on top of each other.

•

Only transport the dispenser in an upright position.

•

When storing the dispenser, ensure that it is only stored indoors and take
precautions against parasites.

•

Protect the dispenser from the influence of unusual odors.

•

Prior to transportation, each dispenser must be positioned and fastened
individually on a special pallet.

Cafitesse 700 - Installation / Puttting into Operation

Summary of Contents for Cafitesse 700










































































































































































































































































Search results

Summary of Contents for Cafitesse 700

Reviews:

Related manuals for Cafitesse 700

Brands by name

Popular brands

Douwe Egberts Cafitesse 700, Back Office Manual

Search results

Summary of Contents for Cafitesse 700

Reviews:

Related manuals for Cafitesse 700

Brands by name

Popular brands