Douwe Egberts Cafitesse 700, Back Office Manual

Page: 215 / 265

July 2004
5F - 13
Functions - cooling system
F.2.7 Disassembly of the door and the hinges of the cooling compartment
Fig. 2
• Disconnect the dispenser from the power
supply system and close the water tap.
• Open the right dispenser door and remove
the locking screw.
• Remove the left housing cover (1) and the
left front panel (2) and then undo the cable
harness for the delivery button. (Fig. 1)
• Remove the combined trough (3) and the
water distributor panel (4). (Fig. 1)
• Take out the water distributor (5). (Fig. 1)
• Open the cooling compartment and remove
the product packs from the cooling compart-
ment.
• Disassemble the cooling compartment (6)
(Fig. 1). (See chapter F.2.6)
ATTENTION: The cooling compartment is
heavy and must be held firmly.
• Open the top lid (9) and pull it out of its
latches (10) on the right- and left-hand side.
(Fig. 2)
• Place the cooling compartment down on its
left side and then open the door of the
cooling compartment carefully.
• Pull the door (7) of the cooling compart-
ment out of the hinges (8). (Fig. 2)
• Use two screwdrivers to remove the hinges
from the cooling compartment housing as
shown in Fig. 3.
• The assembly is carried out in reverse
order.
Fig. 3
8
7
Fig. 1
5
1
2
6
4
3
9
10
Cafitesse 700 - Functions - cooling system