Douwe Egberts Cafitesse 700 Back Office Manual Download Page 228

Page: 228 / 265

July 2004

5G - 4

Functions - housing

G.2.3Disassembly of the right dispenser cover

•Disconnect the dispenser from the power

supply system and close the water tap.

•Open the right dispenser door (1) and

swing the housing cover (2) all the way
upward. (Fig. 1)

•Press the hinges (3) of the housing cover

slightly  inward;  if  necessary,  undo  the
fastening  screws  (4)  on  one  side  of  the
hinges.  (Fig.  2)

•Unhinge and remove the housing cover.

•The assembly procedure is carried out in

the reverse order of steps.

Fig. 1

Cafitesse 700 - Functions - housing

Summary of Contents for Cafitesse 700










































































































































































































































































Search results

Summary of Contents for Cafitesse 700

Reviews:

Related manuals for Cafitesse 700

Brands by name

Popular brands

Douwe Egberts Cafitesse 700, Back Office Manual

Search results

Summary of Contents for Cafitesse 700

Reviews:

Related manuals for Cafitesse 700

Brands by name

Popular brands