Douwe Egberts Cafitesse 700, Back Office Manual

Page: 23 / 265

July 2004
Installation /
Putting into Operation
2 - 11
2.4 Installation / putting into operation
After having unpacked the dispenser:
- Observe the specifications on the rating
plate
- Check the mono-phase plug and ensure
that national voltages and tolerances are
provided.
- Ensure that the fuse of the group to
which the dispenser is connected is in
accordance with the national regulations.
- Contact the local power supply company
to ask for the voltage values and toler-
ances, if required.
- Measure the water pressure.
- Measure and check the supply voltage.
Used packaging:
Packaging Material*
Outer cardboard box Corrugated board
Inner packaging Corrugated board
*
Disposal of material must always be done in accordance with
- country-specific,
- legal,
- safety requirements, and
- environmental requirements!
** Composition:
Liner
: Kraft liner, GSM substance 150g/m
2
, marbled color
Fluting paper : Wave substance, GSM substance 105 g/m2, brown color
Inner paper : Duplex, GSM substance 170 g/m2, brown color
2.3.3 Disposal of packaging and dispenser at the end of their service life
Cafitesse 700 - Installation / Puttting into Operation