Douwe Egberts Cafitesse 700, Back Office Manual

Page: 157 / 265

July 2004
5A - 15
Functions - water system
Disassembly from the front
• Disconnect the dispenser from the power
supply system and close the water tap.
• Remove the drip tray (1) including the drip
grid (2). (Fig 1)
• Remove the cup trays (3). (Fig. 1)
• Remove the splash panel (4). (Fig. 1) (See
chapter D.2.2)
• Pull off the plug (5) on the power supply
unit. (Fig. 2)
• Lift up the power supply unit (6) slightly and
pull it out of the dispenser towards the front.
(Fig. 2)
• Remove the cover above the inlet valve.
• Unscrew the water connection hose and let
the water run out into a provided container.
• Undo the clamping lock (7) on the inlet valve
(8) and remove the inlet valve sidewards out
of the base stay. (Fig. 3)
• Pull off the cable contacts on the inlet valve.
(Fig. 3)
• Remove the hose clip (9) from the inlet hose
(10) and then pull off the inlet hose from the
inlet valve. (Fig. 3)
Hold a cloth underneath as there may
be remaining water in the inlet hose of
the boiler.
• The assembly is carried out in reverse order.
A.2.8 Disassembly of the inlet valve
xxxxxxxxx xxxxxxx
xxxxxx xxxxxxxxxx
Fig. 1
1
3
2
7
Fig. 3
8
9
10
Fig. 3
Fig. 2
6
5
4
Cafitesse 700 - Functions - water system