Douwe Egberts Cafitesse 700, Back Office Manual

Page: 147 / 265

July 2004
5A - 5
Functions - water system
WARNING: Due to the special shape of
the boiler, cold water runs out
of the inlet zone first, followed
by very hot water. Beware of
the risk of scalding. Keep your
hands and other parts of your
body away from the hot water.
Due to the high temperatures of the
boiler's components, it is advisable to
allow the boiler to cool down for
several minutes or to rinse the boiler
by refilling cold water and draining it
before commencing any work in the
hot water area of the boiler.
• Disconnect the dispenser from the power
supply system and close the water tap.
• Open the right dispenser door and remove
the locking screw (1). (Fig. 1)
• Remove the left housing cover (2) and the
left front panel (3), and then undo the cable
harness for the delivery button. (Fig. 1)
• Remove the hot water outlet hose (4) includ-
ing the hose holder (5) from the boiler panel.
(Fig. 1)
• Let the water run out of the boiler.
(See chapter A.2.2)
• Remove the combined trough (6) and the
water distributor panel (7). (Fig. 2)
• Slightly squeeze the grip (8) on the water
distributor (9) and pull it towards the right out
of the console. (Fig. 2)
• Undo all cable connections and the water
supply connection on the boiler.
• Hook the water inlet tube onto the rear panel
of the dispenser.
3
2
1
Fig. 1
Fig. 2
A.2.3 Tilting the boiler into the service position and disassembling the boiler
4
5
6
7
9 8
Cafitesse 700 - Functions - water system