Douwe Egberts Cafitesse 700, Back Office Manual

Page: 15 / 265

July 2004
Installation /
Putting into Operation
2 - 3
Transport due to location change
When transporting single dispensers,
place them on the special Cafitesse
pallet (0.78 m x 0.55 m).
When transporting a used dispenser to a new
location:
• Disconnect the mains plug.
• Disconnect the dispenser from the water
supply.
• Remove the product packs (BIBs).
• Drain the boiler.
WARNING: Danger of being scalded by
hot water!
• Tilt the boiler forwards in order to drain the
residual water.
• Pack the dispenser in such a manner that a
safe transport is guaranteed. Use the original
packaging if possible. (Fig. 1, 2)
• Before storing the dispenser for a longer
period of time, it must have been cleaned
correctly.
• When used dispensers are stored for a long
time, the inlet valve of the water supply hose
towards the boiler must be disconnected in
order to ensure that the hose is empty. In
this way, future spoiling of the taste is
avoided.
Original packaging by the manufacturer
• European pallets (0.80 m x 1.20 m/
31.49 in x 47.24 in):
2 Cafitesse 700 dispensers (1 pile with
2 dispensers)
• U.S. pallets (1.00 m x 1.20 m/39.37 in x
47.24 in):
2 Cafitesse 700 dispensers (1 pile with
2 dispensers)
Storage requirements
• The dispenser must be stored in dry and
frostproof ambient conditions, and must not
be exposed to sunlight.
xxxxx xxxx
xxxx xxx xxxxx x xx
xxxxx xxx xxxx xxxx
x xx xxxx x xxxx xx x
xxxx xxxx x
xxxx
xxxx x xx xxxx
x
xxxx xx x
xxxx xxxx
x
xxxx
xxxx x xx
xxxx x
xxxx
xx x xxxx
xxxx x
Fig. 1
Fig. 2
Cafitesse 700 - Installation / Puttting into Operation Cafitesse 700 - Installation / Puttting into Operation