Douwe Egberts Cafitesse 700, Back Office Manual

Page: 152 / 265

July 2004
5A - 10
Functions - water system
Disassembly of the seal
• Remove the combined trough (6) and the
water distributor panel (7). (Fig. 3)
• Slightly squeeze the grip (8) on the water
distributor (9) and pull it towards the right out
of the console. (Fig. 3)
• Tilt the boiler into the service position.
(See chapter A.2.3)
• Remove the cover (10) of the boiler insula-
tion and unscrew the boiler screw cap (11)
including the seal. (Fig. 4)
• Press the temperature sensor seal (12) from
the inside out of the boiler. (Fig. 4)
• The assembly is carried out in reverse order.
ATTENTION: On assembly, insert the seal in
the boiler so that it closes off
correctly with the boiler wall
both internally and externally.
Push the temperature sensor
far enough into the seal.
If internal elbows have been installed:
-
The temperature sensor is located in the seal
above the outlet valves in the boiler wall.
- The seal below the outlet valves is closed off
with a stainless steel plug.
Fig. 4
11
12
10
Fig. 3
6
7
9 8
Cafitesse 700 - Functions - water system