Douwe Egberts Cafitesse 700, Back Office Manual

Page: 60 / 265

*errors will be logged ** errors will not be logged *** UI-error messages: higher priority overrules lower priority, with same priority message of first appearance is shown
July 2004 3 - 22
Errors payment system
No. Description Over-
rules Set condition Reset condition Remarks Cause Remedy Prio-
rity***
100 Payment module error When one of the
following conditions
appear:
1. Manufacture defined
error 0,1 or 2
2. Reader requires
service
3. Reader failure
4. MDB bill/changer
ROM checksum failed
5. MDB changer was
reset
6. CSI interface error
(communication)
7. CSI system error
Automatically, when the
problem has been solved
OR
by restarting the system,
when the problem has
been solved Similar errors
(see column
‘Set condition’)
generated by
different
payment
systems are
combined and
displayed as
error 100.
Further info
concerning the
error must be
found in the
payment system
manual/menu The respective payment
system generates one of
the mentioned errors. Check the payment system
by means of the respective
payment system manual. 100
101 Payment system not
responding Communication to the
payment system fails Automatically, when the
problem has been solved
OR
by restarting the system,
when the problem has
been solved. Connections to paymens
system loose or
defective. Connect correctly and/or
replace connections to
payment system. 100
102Credit handling system
error
1. When an internal error
occurs in the credit
handling system
(payment system
software) OR
2. When an unassigned
error from the
payment system is
set.
Automatically, when the
problem has been solved
OR
by restarting the system,
when the problem has
been solved. 1. The payment system
generates one of the
mentioned errors
2. Payment module
defective
1. Check payment system
and solve problem by
means of the respective
manual
2. Try again or replace
payment module
100