Atlas Copco PowerMACS 4000, User Manual

Page: 120 / 668

Set Up and Maintenance
120 9836 3521 01
If you specified more than one station in the system the wizard will repeat the sequence above from dialog
two for each station.
In the next step you can add and set up devices that you will have in your system. Devices are used to get
information in and out of the system, like printers, fieldbuses etc.
In the listbox all stations and devices are presented.
If you want to change the name or any other parameter for a device, select the device and press Edit .
To remove a device, select the device and press Remove .
To add a device, select a station and press Add . A form is presented where you can select what type of
device you want to add.
Devices must be set up to work properly. When you press OK a form is presented where you can set up
various parameters.