Atlas Copco PowerMACS 4000, User Manual

Page: 565 / 668

Peripheral Devices
9836 3521 01 565
8.14.4.32 GetEventEx
Description: Call this method to read the next Event from the FIFO queue for the API device.
The FIFO queue can hold max 200 events. If overflowed then the oldest event is
overwritten. Once an event has been read by a call to this method it cannot be read again.
If the queue is empty when called then
eRetNoData is returned.
Return type : A RetCodeEnum value.
Syntax: object . GetEvent ( DataNo, SeqNo, Ts, Code, Typ, Stn, Blt, Pgm, Str )
Obj./Arg. Type Dir Description
object
Api
The Api object to operate on.
DataNo Integer Out A device unique sequence number. This number is
incremented by one for each event reported over this
device.
SeqNo Long Out A global sequence number. This number is incremented
by one for each event generated by the system.
Ts Long Out Date and time for event. Expressed as no of seconds
since 1970-01-01 00:00:00
Code Integer Out Event code, see List of events for possible values.
Typ Integer Out Event type, see View Event Log.
Stn Integer Out Station on which the event occurred, 0 if not relevant
Blt Integer Out Bolt for which the event occurred, 0 if not relevant
Pgm String Out Tightening program connected to the event, 0 if not
relevant
Str String Out Event string in the language configured using ToolsTalk
PowerMACS.
Sev SeverityEnum Out The Severity of the event.
8.14.4.33 GetEventObj
Description: This method is similar to GetEventEx but returns data packed in an object.
Return type : A RetCodeEnum value.
Syntax: object . GetEventObj ( EventObj )
Obj./Arg. Type Dir Description
object Api The Api object to operate on.
EventObj EventData Out Object which contains all event data.