Atlas Copco PowerMACS 4000, User Manual

Page: 625 / 668

Appendix
9836 3521 01 625
10 Appendix
10.1 List of events
The below table lists the Code, Compact code, Type, Severity and Event string for most events that can
be generated by the system. The compact event code is only used when events are reported from an
Ethernet Open Protocol device.
Code
Comp
Code
Type Severity Event string
1 1 Ext. com Error Unexpected signal: %d %d %d
2 2 System Error DB Get error %d, Proc %d, Case %d
3 3 Hardware Error Spurious interrupt %d, %d, %d
4 4 System Error Internal error on line %d in class base no %d, ret %d
6 40 Access Info Operator login
7 41 Access Info Operator logout
8 43 Access Info Illegal login
101 9 Power up Info Power on
102 10 Hardware Error System: Lost connection to TC %d
103 11 Hardware Info System: Established connection to TC %d
104 12 Hardware Error System: TC %d is of wrong type
105 13 Hardware Error System: Spindle TC %d is configured as system TC
106 442 Hardware Error System: TC %d is of wrong version
107 443 Hardware Error System: TC %d participates in another system
108 444 Hardware Error System: TC %d needs coldstart
201 14 Setup Error Easy View parameter %d fails in pos %d
202 15 System Error Error when reading/writing ODB image (err=%d)
203 16 System Error Error when reading ODB image (ODB seq.=%d, my seq.=%d)
204 431 System Error Error when receiving (type=%d, d1=%d, d2=%d)
205 432 System Error PLC ZIP file access error (access=%d, info=%d)
207 625 Setup Info New setup loaded
208 626 Setup Info Program changed
501 901 System Error Trying to read event that no longer exists (missing %d)
601 18 System Warning Start is impossible since there are no active spindles
603 20 System Error Bolt %d is connected to invalid spindle %d