Atlas Copco PowerMACS 4000, User Manual

Page: 476 / 668

Peripheral Devices
476 9836 3521 01
For the values spindle number, bolt number and program number the setting in the field width in the
reporter sets the number of digits to use, it is padded with 0‟s to the left to reach this number of digits. If
width is empty the actual number of digits in the result value is used.
The string sent as Maintenance Sequence is left aligned and padded with spaces to reach 30 characters.
If the total numbers of characters selected are more than 30 only the first 30 (counted from left) will be
sent. In this case an event will be issued to inform the user of the occurrence.
Example: With the following settings in the reporter:
Result variable Order: Width:
Station name 1 6
Spindle number 2 3
Bolt number
Program number 4 2
Station name =
Test1234
Spindle Number =
12
Bolt Number =
17
Program Number =
21
The maintenance sequence will be “
Test12012-21
”
8.11.5.3 Possible error codes
Value sent Meaning Corresponding PowerMACS error
1 MD-max THM, torque high monitoring
2 MD-min TLM, torque low monitoring
3 WI-max AHM, angle high monitoring
4 WI-min ALM, angle low monitoring
5 Angle different
DEV1M, DEV2M or DEV, Deviation in interval 1 or 2 to high during
monitoring or Deviation to high from check. Set if any of these errors are
present.
6 Gradient max TRH, Torque rate to high from check.
7 Gradient min TRL, Torque rate to low from check.
8 Draft1 max TR1HM, torque rate 1 high monitoring
9 Draft1 min TR1LM, torque rate 1 low monitoring
10 Draft2 max TR2HM, torque rate 2 high monitoring
11 Draft2 min TR2LM, torque rate 2 low monitoring
13 Not OK-Time
TIH or TIL, time high or low from check
Also TIR, time restriction
18 Not enough WI AL, angle low from check
19 Self tap max PVTH, post view torque too high from check