Atlas Copco PowerMACS 4000, User Manual

Page: 37 / 668

System Architecture
9836 3521 01 37
The events menu contains all hardware and critical system errors that have occured on the TC since the
last reset. When the ALARM led is lit on a TC the error message can be found in the events menu.
Ev# 5094
DC Bus Low
10:36 Back
Show Event
The event code and a short
description is shown. The
time of the event is shown in
the lower left part of the
screen.
Press Up/Down buttons to
scroll between events.
Info Menu
– Sys info
The System Information menu is grouped by TC, Servo and Spindle.
Information Menu Description
TC Info
System Type System Type (PowerMACS Tightening)
Appl Ver PowerMACS Application Version
Boot Ver PowerMACS Boot Version
PCB PCB Version
Hw Ver Hardware Version
Unit Serial No Unit Serial Number
Unit Art No Unit Article Number
TC serial No Serial number of TC board
IF1 MAC Address MAC Address of interface 1
IF2 MAC Address MAC Address of interface 2
Setup Name Name of currently loaded setup
Servo Info
Software Ver Servo Software Version
Boot Ver Servo Boot Version
Serial No Servo Serial Number
HW Ver Servo hardware version
Spindle Info
Software Ver Spindle Software Version
Boot Ver Spindle Boot Version