Atlas Copco PowerMACS 4000, User Manual

Page: 528 / 668

Peripheral Devices
528 9836 3521 01
byte
PowerMACS
Input area
CC-Link master
Output
0 PLC bool AT 3000.0 Y0 (bit 0)
: PLC bool AT 3000.1 Y1 (bit 1)
: : :
0 PLC bool AT 3000.7 Y7 (bit 7)
1 PLC bool AT 3001.0 Y8 (bit 8)
: : :
7 PLC bool AT 3007.7
Y
Data
bits
Y63 (bit 63)
8+9 PLC word AT 3008 Word 1
10+11 PLC word AT 3010 Word 2
: : :
22+23 PLC word AT 3022
RWw
Data
word
registers Word 8
byte
PowerMACS
Output area
CC-Link master
Input
0 PLC bool AT 3300.0 X0 (bit 0)
: PLC bool AT 3300.1 X1 (bit 1)
: : :
0 PLC bool AT 3300.7 X7 (bit 7)
1 PLC bool AT 3301.0 X8 (bit 8)
: : :
7 PLC bool AT 3307.7
X
Data
bits
X63 (bit 63)
8+9 PLC word AT 3308 Word 1
10+11 PLC word AT 3310 Word 2
: : :
22+23 PLC word AT 3322
RWr
Data
word
registers Word 8
Two LED‟s on the AnyBus module indicate the status of the CC-Link. These LED:s can also be displayed
from the
System Map form, see
Indication of the fieldbus node’s
for how to do this.
The function of the respective LED is as follows:
LED Function Indicates
1 Run Steady off
– No network participation, timeout status (no power).
Steady Green
– Participating, normal operation.
Steady Red
–
Major fault (FATAL error).
2 Error Steady off
– No error detected (no power).
Steady Red
– Major fault (Exception or FATAL event).
Red, flickering
– CRC error (temporary flickering).
Red, flashing
– Station Number or Baud rate has changed since startup
(flashing)