Peripheral Devices
460
9836 3521 01
If the connection to the PLUS server is broken when the cycle is finished the data will be sent when the
connection is established again.
If unchecked the sending of data is controlled by the PLC variable PLUS_DOKUENABLE instead.
-Converts the received TMUs to a mode number. Has the same functionality as the
conversion tables used for the Stations Work piece identifier and Multiple identifiers functions.
FP table
-
The value to use as FP, “Fertigungspunkt” when sending cycle data to PLUS is dependent on
the mode used for the tightening. The FP to use are specified in this table with one row for each mode. If
no values are specified for a mode, cycle data produced when running this mode will not be sent to the
PLUS server.
The values specified will also be included in the cycle data as the result variables Station QO
Strings entered in the columns
US if ok, US if OKR and US if NOK
for a specific mode are used in the
cycle data US field. US is part of the bolt data. US is selected according the the table below.
Bolt Status
Station ET
Station Status
Field used
OK
E
-
US if OK
OKR
E
-
US if OKR
NOK
E
-
US if NOK
TERMNOK
E
-
US if NOK
NOKRM
E
-
US if NOK
OK
G
OK or OKR
US if OK
OKR
G
OK or OKR
US if OKR
NOK
G
OK or OKR
US if NOK
TERMNOK
G
OK or OKR
US if NOK
NOKRM
G
OK or OKR
US if NOK
OK
G
NOK or TERMNOK
US if NOK
OKR
G
NOK or TERMNOK
US if NOK
NOK
G
NOK or TERMNOK
US if NOK
TERMNOK
G
NOK or TERMNOK
US if NOK
NOKRM
G
NOK or TERMNOK
US if NOK
If no string is entered the result variable Id Res 4 is used. If Id Res 4 is also empty eight zeros are sent
(i.e. 00000000)
Test PLUS
- When this button is pressed the connection to the PLUS server is tested. The result of the
test will be indicated as OK or NOK. The test button is only available if the advanced form is opened
connected to the target system.
Summary of Contents for PowerMACS 4000
