Atlas Copco PowerMACS 4000, User Manual

Page: 384 / 668

Tightening
384 9836 3521 01
Variable name Description
Free No 2 The value of the PLC output FREENUM2 when the cycle was started (see Station
variables).
Free Str 2 The value of the PLC output FREESTRING2 when the cycle was started (see Station
variables).
Free Str 3 The value of the PLC output FREESTRING3 when the cycle was started (see Station
variables).
Data No Station A tightening unique sequence number. This number is incremented by one for each cycle
produced by the station.
Data No System A tightening unique sequence number. This number is incremented by one for each cycle
produced by the system.
Station QO A variable specific for the PLUS protocol. The variable will only have a valid value if a
PLUS device is defined. The value is taken from the QO/SA Table in the PLUS device.
Station SA A variable specific for the PLUS protocol. The variable will only have a valid value if a
PLUS device is defined. The value is taken from the QO/SA Table in the PLUS device.
Station AB A variable specific for the PLUS protocol. The variable will only have a valid value if a
PLUS device is defined. The value is taken from Station AB in the PLUS device.
ID Res 1 Multiple identifiers result variable 1. Max. 40 ASCII characters.
ID Res 2 Multiple identifiers result variable 2. Max. 40 ASCII characters.
ID Res 3 Multiple identifiers result variable 3. Max. 40 ASCII characters.
ID Res 4 Multiple identifiers result variable 4. Max. 40 ASCII characters.
No Bolts Number of bolts in the Cycle Data
ID Res 5 Multiple identifiers result variable 4. Max. 40 ASCII characters.
ID Res 6 Multiple identifiers result variable 4. Max. 40 ASCII characters.
Audi PRT Tag A variable specific for the Audi XML protocol. The variable will only have a valid value if a
Audi XML device is defined.
Audi PI1 Tag A variable specific for the Audi XML protocol. The variable will only have a valid value if a
Audi XML device is defined.
Audi PI2 Tag A variable specific for the Audi XML protocol. The variable will only have a valid value if a
Audi XML device is defined.
Audi STC Tag A variable specific for the Audi XML protocol. The variable will only have a valid value if a
Audi XML device is defined.