Atlas Copco PowerMACS 4000, User Manual

Page: 263 / 668

Tightening
9836 3521 01 263
The Settings window displays parameters for the currently selected item (step or program). The default
location is on the right side in the Tightening Program window but it can be placed freely.
The information for programs is divided in the following groups. To show program properties click on the
topmost rectangle in the program.
Group Use
Common Basic properties for the program
User Variables Definition of program user variables and values.
Settings Trace, monitoring and report limit settings for the program.
The information for steps is divided in the following groups. To show step properties click on a step in the
program.
Group Use
Control What task the step performs. See Step
– Control.
Restrictions What restriction to run during the step. See Step
– Restriction.
Checks What checks to execute after the step. See Step
– Check.
Rejects Reject management in case anything goes wrong. See Step
– Rejects.
Ramps & Other Other configuration parameters for the step. See Step
– Ramps & Other.