Atlas Copco PowerMACS 4000, User Manual

Page: 220 / 668

PLC
220 9836 3521 01
Variable Type Use
CONS_IN_1 BOOL Input connected to the ToolsTalk PowerMACS form PLC Console.
CONS_IN_2 BOOL Input connected to the ToolsTalk PowerMACS form PLC Console.
CONS_IN_3 BOOL Input connected to the ToolsTalk PowerMACS form PLC Console.
CONS_IN_4 STRING(40) Input connected to the ToolsTalk PowerMACS form PLC Console.
CONS_IN_5 STRING(40) Input connected to the ToolsTalk PowerMACS form PLC Console.
SERVOSTATUS ARRAY[1..50]
OF BYTE Reports the current status of each servo (TC) in the system.
The respective bits have the following meaning (bit 0 is the least
significant):

0: (value 1) Servo NOK

1: (value 2) Communication NOK

2: (value 4) Over temperature

3: (value 8) Spindle not ready

4: (value 16) TC out of order

5: (value 32) Reserved

6: (value 64) Reserved

7: (value 128) Any Fault
See also the description of the PLC input RESET.
SPINDLESTATUS ARRAY [1..50]
OF BYTE Reports the current status of each spindle (connected to TC) in the
system.
The respective bits have the following meaning (bit 0 is the least
significant):

0: (value 1) Spindle NOK

1: (value 2) Communication NOK

2: (value 4) Over temperature

3: (value 8) Servo not ready

4: (value 16) Reserved

5: (value 32) Reserved

6: (value 64) Reserved

7: (value 128) Any Fault
See also the description of the PLC input RESET.