Atlas Copco PowerMACS 4000, User Manual

Page: 615 / 668

Peripheral Devices
9836 3521 01 615
8.17.5.4 Program, General data
Syntax:
Program[ <pgm name> ].General. <parameter>
<
pgm name
> = The name of the program
<parameter>
= See table below
description)
<parameter> Data type Description
StopMonAtNokStep Boolean If True then monitoring is stopped when a step have a
NOK status when it ends.
Use2ndMonBuf Boolean If true then 2nd monitoring buffer is used if there is more
than one used torque or angle channel.
ReportTqLimit Float Report threshold torque limit.
If none of the bolts executed for a cycle (disconnected
bolts excluded) exceeded this value then the
corresponding cycle data will be automatically dropped
RemFastTqLimit Float Remove fastener torque limit.
When the measured torque exceeds the entered value
the current step is immediately stopped.
Example:
Program[Pgm01].General.StopMonAtNokStep