ABB ACS560, Firmware Manual

Page: 139 / 514

Control macros 139
Parameter Settings
To enable the SPFC macro, navigate to

• Main menu

Connection macro

SPFC
or
• Main menu

Complete parameter list parameter 96.04 Macro select

[18] SPFC .
The following default values are used for the SPFC macro:
No. Value No. Value
10.24 7 = Running 22.73 0 = Not used
10.27 45 = PFC1 22.74 0 = Not used
10.30
46 = PFC2
23.11
6 = DI5
12.17 0 28.11 1 = AI1 scaled
12.20
50.0
28.15
16 = PID
13.12 2 = Output frequency 28.22 0 = Always off
13.18 50.0 28.23 0 = Always off
19.11 5 = DI3 28.71 0 = Acc/Dec time 1
19.17
0 = No
30.11
-1500 rpm
20.01 1 = In1 Start 31.01 1 = Inactive (true)
20.03
2 = DI1
31.02
0 = Fault
20.04 0 = Always off 40.07 2 = On when drive running
20.05 0 = Always off 40.16 11 = AI1 percent
20.06 1 = In1 Start 40.17 0 = Not selected
20.08
7 = DI6
40.19
0 = Not selected
20.09 0 = Always off 40.20 0 = Not selected
20.12
3 = DI2
40.32
2.50
20.19 1 = Selected 40.33 3.0
21.03 0 = Coast 76.21 2 = SPFC
22.11 16 = PID 76.25 2
22.18
16 = PID
76.27
2
22.22 0 = Always off 99.04 0 = Scalar
22.23
0 = Always off