ABB ACS560, Firmware Manual

Page: 17 / 514

Introduction to the manual 17
Cyber security disclaimer
This product is designed to be connected to and to communicate information and
data via a network interface. It is Customer's sole responsibility to provide and
continuously ensure a secure connection between the product and Customer network
or any other network (as the case may be). Customer shall establish and maintain
any appropriate measures (such as but not limited to the installation of firewalls,
application of authentication measures, encryption of data, installation of anti-virus
programs, etc.) to protect the product, the network, its system and the interface
against any kind of security breaches, unauthorized access, interference, intrusion,
leakage and/or theft of data or information. ABB and its affiliates are not liable for
Intermediate circuit See DC link .
Inverter Converts direct current and voltage to alternating current and voltage.
I/O Input/Output
L
ON
W
ORKS
® L
ON
W
ORKS
® (local operating network) is a networking platform
specifically created to address the needs of control applications.
LSW Least significant word
Macro Pre-defined default values of parameters in drive control program. Each
macro is intended for a specific application. See chapter
Control macros
on page 101 .
NETA-21 Remote monitoring tool
Network control With fieldbus protocols based on the Common Industrial Protocol
(CIP
TM
), such as Ethernet/IP, denotes the control of the drive using the
Net Ctrl and Net Ref objects of the ODVA AC/DC Drive Profile. For more
information, see
www.odva.org , and the following manual:
FENA-01/-11/-21 Ethernet adapter module user’s manual
(3AUA0000093568 [English]).
Parameter User-adjustable operation instruction to the drive, or signal measured or
calculated by the drive
PID/Loop controller Proportional–integral–derivative controller. Drive speed control is based
on PID algorithm.
PLC Programmable logic controller
PROFIBUS,
PROFIBUS DP,
PROFINET IO Registered trademarks of PI - PROFIBUS & PROFINET International
R0, R1,... Frame (size)
RO Relay output; interface for a digital output signal. Implemented with a
relay.
Rectifier Converts alternating current and voltage to direct current and voltage.
STO Safe torque off. See chapter The Safe torque off function in the
Hardware manual of the drive.
Term/abbreviation Explanation