ABB ACS560, Firmware Manual

Page: 316 / 514

316 Parameters
45.04 Saved energy Energy saved in kWh compared to direct-on-line motor
connection.
If the internal brake chopper of the drive is enabled, all energy
fed by the motor to the drive is assumed to be converted into
heat.
This parameter is read-only (see parameter
45.21 Energy
calculations reset ).
0.0
0.0…214748364.0
kWh Energy savings in kWh. 1 = 1 kWh
45.05 Saved money
x1000 Monetary savings in thousands compared to direct-on-line
motor connection. This parameter is incremented when
45.06
Saved money rolls over.
This parameter is read-only (see parameter 45.21 Energy
calculations reset ).
0 INR
0…4294967295
thousands Monetary savings in thousands of units. 1 = 1 unit
45.06 Saved money Monetary savings compared to direct-on-line motor
connection. This value is a calculated by multiplying the
saved energy in kWh by the currently active energy tariff
(
45.14 Tariff selection ).
When this parameter rolls over, parameter 45.05 Saved
money x1000 is incremented.
This parameter is read-only (see parameter 45.21 Energy
calculations reset ).
0.00 INR
0.00…999.99 units Monetary savings. 1 = 1 unit
45.07 Saved amount Monetary savings compared to direct-on-line motor
connection. This value is a calculated by multiplying the
saved energy in kWh by the currently active energy tariff
(
45.14 Tariff selection ).
This parameter is read-only (see parameter 45.21 Energy
calculations reset ).
0.00 INR
0.00…
21474830.08 units Monetary savings. 1 = 1 unit
45.08 CO2 reduction in
kilotons Reduction in CO
2
emissions in metric kilotons compared to
direct-on-line motor connection. This value is incremented
when parameter
45.09 CO2 reduction in tons rolls over.
This parameter is read-only (see parameter 45.21 Energy
calculations reset ).
0
0…65535 metric
kilotons Reduction in CO
2
emissions in metric kilotons. 1 = 1 metric
kiloton
45.09 CO2 reduction in
tons Reduction in CO
2
emissions in metric tons compared to
direct-on-line motor connection. This value is calculated by
multiplying the saved energy in MWh by the value of
parameter
45.18 CO2 conversion factor (by default, 0.5
metric tons/MWh).
When this parameter rolls over, parameter
45.08 CO2
reduction in kilotons is incremented.
This parameter is read-only (see parameter 45.21 Energy
calculations reset ).
0.0
0.0…999.9 metric
tons Reduction in CO
2
emissions in metric tons. 1 = 1 metric
ton
No. Name/Value Description Def/FbEq16