ABB ACS560, Firmware Manual

Page: 202 / 514

202 Parameters
In1P Start; In2 Stop;
In3 Dir The sources of the start and stop commands are selected by
parameters
20.03 Ext1 in1 source and 20.04 Ext1 in2 source .
The source selected by 20.05 Ext1 in3 source determines the
direction. The state transitions of the source bits are
interpreted as follows:
Notes:
• Parameter 20.02 Ext1 start trigger type has no effect with
this setting.
• When source 2 is 0, the Start and Stop keys on the control
panel are disabled.
5
In1P Start fwd; In2P
Start rev; In3 Stop The sources of the start and stop commands are selected by
parameters
20.03 Ext1 in1 source , 20.04 Ext1 in2 source and
20.05 Ext1 in3 source . The source selected by 20.05 Ext1 in3
source determines the stop. The state transitions of the
source bits are interpreted as follows:
Note: Parameter 20.02 Ext1 start trigger type has no effect
with this setting.
6
Control panel The start and stop commands are taken from the control
panel (or PC connected to the panel connector). 11
Fieldbus A The start and stop commands are taken from fieldbus adapter
A.
Note: Set also 20.02 Ext1 start trigger type to Level .
12
Embedded fieldbus The start and stop commands are taken from the embedded
fieldbus interface.
Note: Set also 20.02 Ext1 start trigger type to Level .
14
20.02 Ext1 start trigger
type Defines whether the start signal for external control location
EXT1 is edge-triggered or level-triggered.
Note: This parameter is not effective if a pulse-type start
signal is selected. See the descriptions of the selections of
parameter
20.01 Ext1 commands .
Level
Edge The start signal is edge-triggered. 0
Level The start signal is level-triggered. 1
20.03 Ext1 in1 source Selects source 1 for parameter 20.01 Ext1 commands . DI1
Always off 0 (always off). 0
Always on 1 (always on). 1
DI1 Digital input DI1 ( 10.02 DI delayed status , bit 0). 2
DI2 Digital input DI2 ( 10.02 DI delayed status , bit 1). 3
No. Name/Value Description Def/FbEq16
State of
source 1
( 20.03 )
State of
source 2
( 20.04 )
State of
source 3
( 20.05 )
Command
0 -> 1 1 0 Start forward
0 -> 1 1 1 Start reverse
Any 0 Any Stop
State of
source 1
( 20.03 )
State of
source 2
( 20.04 )
State of
source 3
( 20.05 )
Command
0 -> 1 Any 1 Start forward
Any 0 -> 1 1 Start reverse
Any Any 0 Stop