Trumpf LASERCELL 1005, Руководство оператора

Страница: 507 / 645

5-94
Further service programs
B337EN05.DOC
17. Further service programs
There are further service programs available to the user in addition
to the service programs listed under section 1, "Overview of setting
work". They are saved on the hard disk of the PCU 50 under:
C:\DH\TOPSMANU.DIR\SERVICE.PRG\CUSTOMER
Program overview
Master file name For what purpose?
CP_SRV_TAB_SET.LST Exchange of LTT in utility programs
CP_TRIM_OFF.LST Performing parting cuts
AUFL_ST.LST Cutting standard support slats with short slit (Fig. 32548):
mild steel St.1203, 2 mm sheet thickness
AUFL_QU.LST Cutting support slats with long slit (Fig. 32549):
mild steel St.1203, 2 mm sheet thickness
CP_93918_445_120_
SACRIFIC.LST Cutting sacrificial plate 1 (Fig. 39481):
mild steel St.1203, 1 mm sheet thickness
CP_S99762_438_120_
SACRIFIC.LST Cutting sacrificial plate 2 (Fig. 39487):
mild steel St.1203, 1 mm sheet thickness
Program overview of further service programs
17.2 Replacing LTT’s in utility programs
The service programs CP_FOCUS_CUT (cutting focus search),
CP_OFFSET_CUT (determining joint offset cutting optics) work
with predefined laser technology tables (LTT). The parameters of
the LTT’s are configured respectively for specific applications. It
may be necessary in practice to adjust the parameters of the LTT
to the respective application (material, sheet thickness and laser
output). The LTT in the utility programs named can be replaced as
needed with the utility program CP_SRV_TAB_SET; a new LTT is
defined.
Table 5-16
Replacing LTT’s