Trumpf LASERCELL 1005, Руководство оператора

Страница: 441 / 645

5-28
Cutting head setting work
B337EN05.DOC
6,2 mm
14
m
m
5"
7,5"
1
2
3
1 Auto focus mirror
2 Lens
3 Sheet surface
Recommended values for the automatic adjustment
range
For technological reasons it may be necessary to work with a
AutoLas Plus setting which is outside the AutoLas Plus automatic
setting range.
A dialog box appears at program selection asking whether the
"correct" setting value has been set on the cutting head. If the
AutoLas Plus setting from the laser technology table is outside the
automatic setting range, the differential value by which the setting
value must be manually corrected using the focus adjustment
screw will be displayed in the dialog box.
Example: The automatic setting range of a 5" cutting head must be
shifted downwards by 1.0 mm. The setting value has to be turned
manually from -3.0 mm to -4.0 mm.
Fig. 23180
Exceeding the automatic
adjustment range