Trumpf LASERCELL 1005, Руководство оператора

Страница: 217 / 645

B337EN4_3
Operation
4-57
Switch elements in general
Fig. 39020en
General switch elements
•
He-Ne targeting laser: press the switch element to switch the
He-Ne targeting laser on or off.
•
Gas change timer: switch the switch element to ON when
different cutting gases are to be used for piercing and cutting.
The residual gas can escape from the gas line during the
applied delay of about 10 s. The machine functions are idle
during this time.
-
OFF: There will be no pause when changing the type of
gas or switching the gas pressure between piercing and
cutting; machining will resume at once.
-
On: A TIMER will be started when changing the type of gas
or switching the gas pressure between piercing and cutting.
Processing will not resume until after the applied time has
passed. If the newly selected gas pressure falls within a
predefined range, then the TIMER will not be started and
processing will resume at once.