Trumpf LASERCELL 1005, Руководство оператора

Страница: 139 / 645

3-32
The modules of the laser cutting center
B337EN03.DOC
Processing optics
The laser on the TLC 1005 is used as a tool for laser cutting and
laser welding. For this, sufficient laser power as well as state-of-
the-art technology with respect to processing optics are
prerequisites. The processing optics can be changed quickly and
easily at the machine as needed.
The following processing optics are available:
•
Cutting head with 3.75" lens.
•
Cutting head with 5" lens.
•
Cutting head with 7.5" lens.
The beam bending mirror in the cutting head guides the beam onto
the focusing lens. The lens bundles the arriving laser beam and in
doing so turns it into a cutting tool. The diameter of the laser beam
at the focus (focus point) depends upon the focal length of the
lens, the raw beam diameter and the beam quality of the beam
source in use.
1
5
2
3
6
4
7
8
9
10
1 Unassigned
1 Cutting gas connection
3 Cooling water return connection
4 Distance control system
connection
5 Measuring probe connection
6 Cooling water in connection
7 Beam guideway ventilation
connection
8 Cutting insert
9 Sensor body
10 Nozzle
Cutting head with 7.5" lens.
For cutting
Fig. 32589