Trumpf LASERCELL 1005, Руководство оператора

Страница: 346 / 645

4-186
Operation
B337EN4_8
Select the G54, G55, G56, or G57 zero point memory.
Edit the axis positions manually in the "Default position" field.
Adopt
Press Adopt.
The axis positions entered in the "Default position" field are
transferred to the selected zero point memory: the "Default position"
becomes the "Defined position" and thus takes effect in the NCU.
The "TLC zero point memories G54 G55 G56 G57" mask is
displayed during transmission to the zero point memory. The
defined positions are displayed in the "TLC zero point memory
initial screen" mask once the transmission is finished.
Exit
Abort
Press Exit Abort.
The process is over. The dialog box is closed.
Note: the dialog is aborted if this softkey is pressed before the
Adopt softkey is pressed. The "defined position" in the zero point
memory remains intact.
6.2 Filling the zero point memory for all
axes with the current axis position
Select Set-up >Switch elements > General
or
select Production >Switch elements >General.
Select "Zero point memory".
Press TOGGLE.
The display switches to ON. The "TLC zero point memory
initialization" mask appears. The workpiece coordinate system
(WCS) is active.
If needed: press MCS softkey.
The machine coordinate system is active.
Prerequisite
•
The machine is ready for operation.