Trumpf LASERCELL 1005, Руководство оператора

Страница: 79 / 645

B337EN02.DOC
Installation conditions TLC 1000 and TLC 1005 - Version 5
2-17
High-pressure cutting is cutting with a pressure of > 6 bar. Oxygen
and/or nitrogen are used as cutting gases.
High-pressure cutting is offered as an option for processing
stainless steel and aluminum alloys.
•
During high-pressure cutting with N
2
the minimum line pres-
sure available at the connection point to the machine is 27 bar
(with a gas consumption of 55 Nm
3
/h, a nozzle with
∅
2.3 mm,
and cutting gas pressure of 20 bar).
•
During high-pressure cutting with O
2
the minimum line
pressure available at the connection point to the machine is
15 bar (with a gas consumption of 20 Nm
3
/h, a nozzle with
∅
1.7 mm, and cutting gas pressure of 12 bar).
D [mm]
V/t [Nm
3
/h]
p [bar]
Nozzle diameter
Gas consumption per hour
Pressure (compared to atmospheric pressure)
Maximum gas consumption per hour at 100 % on-time
High-pressure cutting
Fig. 8810