Trumpf LASERCELL 1005, Руководство оператора

Страница: 101 / 645

B337EN02.DOC
Installation conditions TLC 1000 and TLC 1005 - Version 5
2-39
Base for machine body
15
Machine body and base are moved separately to the installation
site and placed separately on the factory floor next to the actual
installation site. The machine body must not be set on to the
base by the operator.
Prerequisite
•
A crane is essential for transport and for the installation of the
machine by the servicing technician.
•
The overhead clearance for an indoor crane must be at least
4 meters.
Note
The position of the chains on the cross beam can be adjusted
within the specified scaling values. The chains must be adjusted to
fit the length of the base and always attached symmetrically.
1
1
1
1
1 Securing points,
corner bracket M36
Base securing points
Base for machine body
for working area X = 1250 mm X = 2000 mm X = 3000 mm X=4000 mm
Length [mm] 3490 4290 5240 6480
Width [mm] 1030 1030 1030 1030
Height [mm] 441 441 441 441
Total height of machine body
on base with Z=0
[mm]
3480 3480 3480 3480
Weight [kg] 1100 1330 1620 2000
Dimension and weight of base
1. Attach the cross beam to the securing points, position 1 (4x),
figure 39479 on the base in such a way that the chains hang
vertically and are arranged symmetrically.
2 Use crane to unload the base from the truck and move it to the
installation site
15
Only for machines with raised machine body and machines with two station
operation.
Unload base from truck and
move to installation site
Fig. 39479
Tab. 2-28