Trumpf LASERCELL 1005, Руководство оператора

Страница: 482 / 645

B337EN05.DOC
Determining the joint offset
5-69
Determining the joint offset
for the welding head
The service program CP_OFFSET_WELD.LST is used to engrave
pairs of lines on a sample part. For this, the C axis is once in
position C0 and once in position C180. The joint offset is then
determined precisely once the lines of a pair of lines form a
continuous line without any offset after the fine evaluation has
been completed. Each pair of lines is assigned an adjustment
value. The determined joint offset values are saved to the data
management when the adjustment values are transferred.
16
12
8
4
0
-4
-8
-12
-1
6
16 12 8 4 0 -4 -8 -12 -16
Y
X
- +
X
-+
Y
1
C0
C1
8
0
C0
C180
1 Rough evaluation
Welding sample
Prerequisite
•
B and C axes are set exactly.
•
The welding head is fully mounted.
•
The beam is centered.
•
The focus position has been determined and set.
Fig. 32408