Trumpf LASERCELL 1005, Руководство оператора

Страница: 87 / 645

B337EN02.DOC
Installation conditions TLC 1000 and TLC 1005 - Version 5
2-25
3.2 Connected loads, fuse protection
The following data represents standard values, which may vary
depending on the machine equipment:
Connected loads of the machine
with laser TLF
2000 TLF
2700 TLF
3200 TLF
4000 TLF
5000 TLF
6000 TLF
8000t TLF
12000t
Total connected load incl. all possible
options and cooling unit
[kVA] 64 75 78 98 161 171 228 336
Maximum fuse protection of the
complete system
at 400 V
[A]
at 460 V [A]
100
100 125
100 125
100 160
125 200
200 250
200 315
250 400
400
Total connected load incl. all possible
options without cooling unit
[kVA] 46 54 57 72 117 127 163 263
Max. fuse protection of the complete
system without cooling unit
at 400 V
[A]
at 460 V [A]
80
63 80
80 100
80 100
100 125
125 160
125 160
160 315
250
Connected loads of the cooling unit
[kVA] 18 21 21 26 44 44 65 73
Fuse protection, cooling unit
at 400 V
[A] 50 50 50 50 63 63 100 160
Cross-section power cable complete
system
[mm
2
] 35 50 50 70 95 120 185 240
Maximum acceptable interruption of
nominal voltage
[ms]
See EN 60204, Part 1, Point 4.3.2, Alternating current supply.
Connected loads, fuse protection
The following applies to cooling units that are equipped with a tank
heating, e.g.: when installed outdoors:
•
The cooling unit is switched on and off using a separate main
switch and requires a separate mains connection to be
provided by the customer.
•
The connected load of the complete system can be reduced by
the connected load of the cooling unit.
•
The power cable is laid after delivery. It can be fed over the
cooling unit pedestal.
Table 2-19
Cooling unit with tank
heating (optional)