Trumpf LASERCELL 1005, Руководство оператора

Страница: 348 / 645

4-188
Operation
B337EN4_8
Exit
Abort
Press Exit Abort.
The process is over. The dialog box is closed.
Note: the dialog is aborted if this softkey is pressed before the
Adopt softkey is pressed. The "defined position" in the zero point
memory remains intact.
6.3 Filling the zero point memory for
individual axes with the current axis
position
The zero point memories can be filled for individual axes. There are
different ways of doing this for rotational axes and linear axes.
Rotational axes can only be selected individually, linear axes either
individually or in X, Y, Z axis combination.
Select Set-up >Switch elements > General
or
select Production >Switch elements >General.
Select "Zero point memory".
Press TOGGLE.
The display switches to ON. The "TLC zero point memory
initialization" mask appears. The workpiece coordinate system
(WCS) is active.
If needed: press MCS softkey.
The machine coordinate system is active.
Continue
Press Continue.
The "TLC zero point memories G54 G55 G56 G57" mask is
displayed while the control system loads the current actual
positions of the axes and the axis positions defined in the zero point
memory.
The "TLC zero point memory initial screen" mask is then opened.
The current axis positions are displayed in the "Actual position ..."
field. The axis positions currently set in the zero point memory are
displayed in the "Defined position" field.
Prerequisite
•
The machine is ready for operation.