B337EN05.DOC
Adjustment work on the welding head
5-63
The reference part is welded twice again with 11 welding seams,
each with a respectively different focus position; first at maximum
laser output and then with minimum laser output.
Prerequisite
•
Power-dependent focus shift is determined.
•
Nozzle distance 15 mm.
•
For focus search with maximum laser output: the laser output
must be programmed at 100% in the UP program
COSTUMER_G820_TABLE.
•
For focus search with minimum laser output: the minimum
laser output needs to be programmed in the UP program
COSTUMER_G820_TABLE.
Note
The maximum and/or the minimum laser output needs to be
reprogrammed for the respective fine search; it is the laser output
that has been respectively programmed with G820 that is in effect.
1
Establish the start position.
2.
Select the program CP_FOCUS_WELD.
3.
Press Select program.
A dialog box is opened.
"Focus search for welding heads" mask
4.
Select Results check after fine search.
5.
Weld reference part with maximum laser output.
6.
Weld reference part with minimum laser output.
7.
Check weld root with both reference parts. Determine focus
position of f=0.
Start monitoring results after
fine search
Fig. 38783en
Содержание LASERCELL 1005
