Trumpf LASERCELL 1005, Руководство оператора

Страница: 270 / 645

4-110
Operation
B337EN4_4
•
Adaptive telescope: the adaptive telescope has four levels for
water pressure. The respective pressure stage is selected
using the switch element. Prerequisite: "Laser service mode"
must be active.
•
Releas. brakes w/o Z: press the switch element to release the
brakes of the drive (except Z axis). The axes can be moved
manually (e.g. after collisions, if it is not possible to move the
axes with the JOG keys). E-STOP has to be active in order to
release the brake.
•
Park axes: press the switch element to deactivate one or more
axes.
•
Head change: each time the processing optics are replaced,
this switch element must be pressed to notify the control
system which processing optics are active. Pressing the switch
element starts the guided dialog “Head selection”: see chapter
"Setting work", section "Changing the processing optics". The
default setting of this switch element is OFF.
•
Measurement functions: this switch element must be pressed
when using the TSD seam sensor system or when utilizing the
Renishaw measuring probe in order to display to the control
system which measurement function is active. The selection
dialog is started by pressing this switch element. The default
setting of this switch element is OFF.
-
Not applied: Seam sensor system TSD and/or measuring
probe are applied at the unit, but not ready for use.
-
Measuring probe (1): Measuring probe for cutting head is
ready for use.
-
Measuring probe (2): Measuring probe for welding head is
ready for use.
-
TSD (200 mm): Seam sensor for welding head with focal
length 200 mm is ready for use.
-
TSD (270 mm): Seam sensor for welding head with focal
length 270 mm is ready for use.
-
TSD (90° angle): Seam sensor for welding head with 90°
angle (camera is shifted by 90°).