Trumpf LASERCELL 1005, Руководство оператора

Страница: 105 / 645

B337EN02.DOC
Installation conditions TLC 1000 and TLC 1005 - Version 5
2-43
7. Planning aid
This planning aid is intended to provide you with an overview of the
preparations to be undertaken by the customer.
You will find detailed information in the relevant subchapters of the
installation conditions.
Time before
delivery of the machine Planning criterion Action
15 weeks Personnel and training Appoint a staff member to be
responsible for the machine
commissioning preparations.
Appoint the operating and
maintenance staff as well as
programmers and arrange a
training schedule for your
specialists.
Appoint a laser safety officer, in
accordance with EN
60825-1
(VBG 93).
14 weeks,
but no later than calendar week ... Conditions at the installation
site
20
Determine the machine’s final
position. Take into consideration
space requirements using
installation plan.
Check the floor requirements
(floor quality, evenness, oil-proof
floor without expansion joints).
Take the weight and dimensions
of the machine into account.
Check that the requirements for
ambient conditions are met
(ambient temperature, insulation,
purity of ambient air).
Check the transport route
(gateway dimensions, overhead
clearance, cable rack heights,
room to negotiate around
corners, etc.).
12 weeks,
but no later than calendar week ... Electrical power supply Install the electrical connections
at the installation site. The
conductor cross section and
fuse protection should be set
out in accordance with the
applicable legal requirements.
30 31