ARCBRO Thunder X-PRO Скачать руководство пользователя страница 1

Страница: 1 / 7

Service Support Spirit

Unique Solution

WWW.ARCBRO.COM

How to set Flame cutting - debugging process ---Thunder X-PRO



Flame cutting - debugging process,

Contains three steps

Solution overview: Step1.

Set the system to flame mode and parameters;

Step2. Manual test flame cutting;

Step 3. Start formal flame cutting ;

Detailed Description:



Step 1- Set the system to flame mode and parameters

Step 1-1 : Press the

【

】

key on the keyboard at the cutting interface; change the cutting

mode to flame mode;

【

See photo below

】

Pic1

Press M key

Display model

Содержание Thunder X-PRO

Страница 1: ...teps Solution overview Step1 Set the system to flame mode and parameters Step2 Manual test flame cutting Step 3 Start formal flame cutting Detailed Description Step 1 Set the system to flame mode and parameters Step 1 1 Press the M key on the keyboard at the cutting interface change the cutting mode to flame mode See photo below Pic1 Press M key Display model ...

Страница 3: ...0 8Mpa Document attachment with flame cutting parameter table Step 2 2 Ignition Adjust the intensity of the flame Press the Ignition key on the keyboard Open preheated oxygen and acetylene valves Feel gas ejected by hand Ignition with a flame igniter Note When igniting the oxygen output gas is too large and the flame is extinguished Control valve on the machine ...

Страница 4: ...h regulating valve Check the strength of the flame Press IO OFF Test flame finish The strength of the flame is adjusted according to the thickness of the steel plate Step 2 3 Test flame cutting Select a graphic in the system gallery to test flame cutting Flame cutting process Ignition Key Cut Key ALL OFF Key Flame torch regulating valve ...

Страница 7: ...Service Support Spirit Unique Solution WWW ARCBRO COM 7 150 200 0 7 0 04 130 160 8 250 300 0 7 0 04 100 130 ...