5
LAN Operation
5.1
To make sure that the LAN is operating correctly, use the "ping" command in the Windows "cmd
prompt" (black and white DOS window) to ping the IP address of the AGM1 module.
5.1.1
On the laptop computer, go to "Start" and "Run".
5.1.2
Type "cmd" and press "Enter".
5.1.3
Type "ping" and the IP address of the module you want to respond (for example "ping 192.168.1.17")
and press "Enter".
5.2
If the ping command is successful, the computer is connected to the CMC. You can now do
maintenance and troubleshooting using the CMC.
Requirements after job completion
Required Conditions
Table 6 Required Conditions
Action / Condition
Data module/Technical publication
None
PC-12/47E AMM Doc No 02300, ISSUE 01 REVISION 26 MSN 545, 1001-1719,
1721-1999
12-B-AM-00-00-00-I
UNCLASSIFIED
Effectivity: All
12-B-45-45-00-00A-331A-A
End of data module
UNCLASSIFIED
2021-12-04 Page 9