2.17
Make sure that the Certification File name agrees with the list given in AMM 12-B-00-00-00-00A-106A-
A .
2.18
Set the appropriate COMM Port setting and click on the START button. An upload status bar will
be shown. The upload may take up to 2 minutes to complete. When the upload is complete a
CERTIFICATION SOFTWARE UPDATE COMPLETE message will be shown.
2.19
When the upload is complete click on the OK button.
2.20
Close the ADAHRS LOADER program by clicking the EXIT button.
2.21
The ADAHRS will re-boot. Wait two minutes after the ADAHRS self test to let the ADAHRS unit warm
up.
2.22
On the laptop computer, click on the Start icon and select "ProgramFiles/
KSG7200_Maintenance_Program/KSG_7200_Maintenance_Program".
2.23
Set the appropriate COMM Port setting on the laptop computer.
2.24
Click on the START MAINTENANCE button.
2.25
Make sure the laptop computer screen shows the CHOOSE ITEM TO VIEW screen.
2.26
Click on the PART NUMBER button. From the Part Number screen for Channel A make sure that the
Certification File ID Number agrees with the list given in AMM 12-B-00-00-00-00A-106A-A .
2.27
Make sure that the DATE and TIMESTAMP is updated with current values.
2.28
Click the CLOSE button to return to the CHOOSE ITEM TO VIEW screen.
2.29
Click the BUILT IN TEST RESULTS button. Make sure that the results screen shows:
MC565 Processor Fault
Passed
Unknown Watchdog Reset
Passed
Watchdog Test
Passed
RAM Test
Passed
RS232 Loopback Test
Passed
ROM Boot CRC32 Test
Passed
ROM Application CRC32 Test
Passed
ROM On Side Channel ID Test
Passed
ROM Cross Side Channel ID Test
Passed
Timer Test
Passed
ARINC 429 Hi Speed Test
Passed
ARINC 429 Lo Speed Test
Passed
Interprocessor Bus Not Operational
Passed
Configuration Module Test
Passed
Non-Volatile memory Test
Passed
2.30
Click on the CLOSE button to close the BUILT IN TEST RESULTS window and return to the CHOOSE
ITEM TO VIEW window.
2.31
Disconnect the Sub D cable from the Maintenance Box J1 connector. Connect the Sub D cable to the
Maintenance Box J2 connector.
2.32
Do Step 2.7 thru Step 2.26 again for Channel B.
2.33
If necessary, disconnect the test equipment and remove it from the aircraft.
PC-12/47E AMM Doc No 02300, ISSUE 01 REVISION 26 MSN 545, 1001-1719,
1721-1999
12-B-AM-00-00-00-I
UNCLASSIFIED
Effectivity: All
12-B-34-25-00-00A-903A-A
UNCLASSIFIED
2021-12-04 Page 4
